Main equipment introduction:
1) White tank outside the machine
Compared with the traditional pit under the net, the surface area of the white water plate outside the machine is larger, and the direction of the white water flow is horizontal, and the air can easily escape from it. Its volume is only 1/3 of the pit under the net, saving space, in the case of the same inlet air content, the air content of the top and outlet of the white water plate outside the machine is much less than that of the traditional pit under the net, especially the bubble content of the outlet, the flow direction of the white water in the pit under the net is down, just the opposite direction of the upward escape of the bubble, so it is difficult to escape from the water surface; The white water flow direction of the white water tray outside the machine is horizontal, and its height is small and the surface area is large, so the bubbles are easy to escape from the water surface.
2) Ahlclear sander
The sand removal system consists of five stages:
√ One section is divided into three groups. The good pulp is removed from the gas tank, and the slurry and slag directly enter the inlet of the slurry pump of the second section desander;
√ The second stage of good pulp to the slurry pump inlet, slurry and slag directly into the third stage of the desander pump inlet;




