Blog

Don't Let the Rotor "Drag": The Core Code for the Efficient Operation of Hydrapulpers The rotor is the core part of the hydrapulper. The Fuchs rotor is commonly used

In the advanced treatment of papermaking wastewater, the physicochemical method has the advantages of fast treatment and good treatment effect, and the general methods used include

The shallow air float consists of a tank body of an air float, a water distribution mechanism, a sludge hopper mechanism, a rotating frame mechanism, a skimmer mechanism, a water l

1, for the mechanical system failure, symptoms and causes, there are overlapping parts, under normal circumstances, when the mechanical system has a failure, there are many reasons

In principle, the lubrication points of papermaking machinery and equipment are closed, and the bearings of the wet section of papermaking machinery use closed bearing housing to w

Manufacturing costs are often the key to a company's profitability, only by reducing costs, can produce greater profits, but if you only pay attention to the cost but do not pay at

First, let's look at the production process of the equipment. After sizing, filling and purifying, the appropriate concentration of pulp is poured into the pulp flow equipment of t

1, the transmission parts of the equipment wear, the transmission parts of the equipment in the process of operation is very easy to wear, in order to improve this situation, we us

1. The damage caused by the rotating movement of the parts of the equipment, such as the pulping and paper making machinery, the calender, the rewinding machine, the dryer, the gea

1, under normal circumstances, due to copper damage, iron damage and other reasons, the motor of paper making equipment will have a certain amount of heat in the daily operation pr

The strength of the paper itself is not enough or the paper itself has weak points, such as the moisture of the paper page is too large, and the knot of the dry cloth is irregular,

1, the lubricating oil has a good resistance to emulsification, can make the water mixed into the oil to separate, which can ensure the quality of the oil is better, more practical