First, let's look at the production process of the equipment. After sizing, filling and purifying, the appropriate concentration of pulp is poured into the pulp flow equipment of the equipment. In addition, after the paper is distributed and levelled through the pulp flow dispenser and the pulp flow box, the paper flows evenly and stably to the surface of the mesh of the moving molding net. After the pulp flows to the net, it is filtered and dehydrated to form a continuous wet web. When the wet web has dried to a certain extent, they are removed from the web and sent to the press for further dehydration.
Next, we look at the structural principle of the equipment, which can actually be seen as a combination of multiple equipment, usually divided into wet and dry two parts, the wet part is the slurry flow equipment, the network part, the press part, and the cadre includes the dryer, calender and paper winder.
In order to maintain the good performance of the press blanket, the press roller is usually equipped with a blanket washing device, which can reach 40% dryness after pressing
