Heating Screw Conveyor
Application
Used for conveying the concentrated ground wood pulp and other pulp to M.C.Mixer, at the same time, heating pulp and adding the bleaching liquor.
Features
- Optimized screw blade insure H.C.pulp can be conveyed smoothly with good loose state, it is in favor of heating pulp uniformly.
- Heating device layout is reasonable, configure the special designed backstepping spiral balde, insure pulp can be designed backstepping spiral balde
- Frequency conversion control can easily adjust the ability to match other equipment.
Structural Components
1.Screw Shaft
Typically crafted from high-quality alloy steel that undergoes a specialized heat treatment process. This alloy steel possesses extremely high strength and hardness, capable of withstanding the significant torque and wear during long-term operation.
The screw blades are precisely designed and processed. Their shape and pitch are optimized based on the characteristics and conveying volume of the conveyed materials to ensure efficient and stable pulp conveyance, avoiding blockages or backflows.
The surface of the screw shaft might undergo special coating treatments, such as hard chromium plating or the application of polymer wear-resistant materials, further enhancing its wear and corrosion resistance and prolonging its service life.
2.Housing
Made from high-quality stainless steel, it exhibits excellent corrosion and oxidation resistance, enabling stable operation in the humid and high-temperature papermaking environment over the long term.
The interior of the housing is equipped with a superior insulation layer, typically consisting of high-temperature-resistant insulation materials like ceramic fibers or rock wool. These insulation materials effectively reduce heat loss, enhance energy utilization efficiency, and lower operating costs.
The two ends of the housing are tightly connected to the inlet and outlet, with sealing devices installed at the connections to prevent pulp leakage and the ingress of external impurities.
3.Heating Device
It can be advanced electric heating elements, such as resistance wires or electromagnetic heating coils, capable of generating heat quickly and uniformly. Or it could be efficient steam heating coils that heat the pulp through steam heat exchange.
The heating elements or coils are evenly distributed within the conveyor to ensure that the pulp is comprehensively and uniformly heated during the conveyance process, allowing the temperature to reach the process requirements.
It is equipped with precise temperature sensors and a temperature control system that can monitor and adjust the heating temperature in real-time, ensuring heating stability and accuracy.
4.Inlet and Outlet
The inlet is designed to be spacious and reasonable, often in the shape of a funnel or an inclined pipe. This facilitates the smooth and rapid entry of concentrated groundwood pulp and other pulp types into the interior of the conveyor, avoiding accumulation and blockages.
At the inlet, there might be buffer devices or guide plates installed to mitigate the impact of the pulp on the interior of the conveyor, protect the equipment, and ensure the uniformity of the feed.
The outlet is tightly and sealingly connected to the high-consistency mixer, usually through flange connections or quick couplings, ensuring that the pulp is accurately and leak-free conveyed into the mixer.
5.Transmission System
Comprises a high-performance motor that can provide sufficient power output to meet the conveyance requirements under various working conditions. The motor typically has a speed regulation function, allowing for flexible adjustment of the conveyance speed based on changes in the production process.
The speed reducer converts the high rotational speed of the motor into the appropriate rotational speed required by the screw shaft and provides a significant torque output, ensuring the stable and efficient operation of the screw shaft.
The coupling is used to connect the motor and the speed reducer, as well as the speed reducer and the screw shaft. It effectively transmits power while serving as a buffer and shock absorber, protecting the various components of the transmission system.
6.Bleach Liquor Injection System
Composed of precise metering pumps and injection devices, it can accurately control the addition volume of the bleach liquor based on the process requirements to ensure thorough mixing of the bleach liquor with the pulp.
The metering pumps adopt advanced control technologies, such as variable frequency speed regulation or pulse control, enabling high-precision flow regulation.
The design of the injection device enables the bleach liquor to be uniformly distributed in the pulp, improving the bleaching effect and reaction efficiency.
Working Principle
1.Feeding:Concentrated groundwood pulp and other pulp types enter the interior of the heating screw conveyor through specific conveying equipment or pipes from the inlet. During the feeding process, the pulp rapidly fills the starting section of the conveyor under the action of gravity and the pushing force of the conveying equipment.
2.Conveying:The screw shaft rotates uniformly under the drive of the transmission system. The frictional force and thrust generated between the rotating screw blades and the pulp push the pulp forward along the housing of the conveyor. Due to the continuous pushing action of the screw blades, the pulp forms a stable flow state and is gradually conveyed towards the outlet.
3.Heating:During the pulp conveyance process, the heating device commences operation. The heat generated by the electric heating elements or steam heating coils is transferred to the pulp through heat conduction and radiation, causing the pulp temperature to gradually increase. Temperature sensors monitor the pulp temperature in real-time and feed the data back to the temperature control system. The temperature control system automatically adjusts the heating power or steam flow based on the set temperature value to ensure that the pulp reaches the predetermined heating temperature.
4.Bleach Liquor Injection:When the pulp reaches a certain position within the conveyor, the bleach liquor injection system activates. The metering pump precisely conveys the bleach liquor to the injection device at a preset flow rate. The injection device uniformly sprays the bleach liquor into the pulp, ensuring thorough contact and mixing of the bleach liquor with the pulp. Under the action of heating and stirring, the bleach liquor undergoes a chemical reaction with the fibers in the pulp, achieving the purpose of bleaching.
5.Discharging:The pulp that has undergone heating and bleach liquor treatment is finally discharged from the outlet under the pushing force of the screw shaft and enters the high-consistency mixer for subsequent process treatments.
Performance Characteristics
1.Efficient Conveyance:Capable of stably and continuously conveying a large volume of pulp to the high-consistency mixer within a short period, enhancing production efficiency.
2.Precise Temperature Control:With an advanced temperature control system, it can heat the pulp to an exact temperature, meeting process requirements, ensuring bleaching effectiveness and product quality.
3.Uniform Mixing:The bleach liquor injection system and the stirring action of the screw shaft ensure thorough and uniform mixing of the bleach liquor with the pulp, improving the efficiency and consistency of the chemical reaction.
4.High Reliability:The structure is robust, the operation is stable, and the maintenance is straightforward. It can reliably operate for an extended period in the harsh papermaking production environment.
5.High Degree of Automation:It can be integrated with the control system of the entire papermaking production line to achieve automated operation, reducing manual intervention and enhancing the accuracy and stability of production.
Main Technical Parameters
|
Type |
ZLS1 |
ZLS2 |
ZLS3 |
ZLS4 |
|
Diameter of screw:mm |
Φ500 |
Φ600 |
Φ700 |
Φ800 |
|
Treating consistency:% |
30~35 |
|||
|
Capacity of production:t/d |
40~70 |
80~120 |
140~170 |
180~230 |
|
(L×W×H):mm |
7.5 |
15 |
22 |
30 |
Hot Tags: heating screw conveyor, China heating screw conveyor suppliers, factory, flotation and deinking equipment, flotation tank design for deinking, deinking performance equipment, pulp flotation machine, pulp deinking equipment, deinking machinery
Previous
No InformationYou Might Also Like
Send Inquiry











