Drump Pulper

Drump Pulper

The structure of the drum pulper mainly includes a roller-shaped drum, as well as the feeding hopper, transmission device, supporting roller device, blocking roller device, sealing device, shield and pulp pool, etc. The outer wall of the drum is inlaid with two large supporting rollers and a large gear. The two large supporting rollers are respectively supported by two sets of small supporting rollers and can rotate on the small supporting rollers. On each side of the large supporting roller on the pulp outlet side, there is a set of blocking roller devices to prevent the axial displacement of the drum.
Send Inquiry
Product Introduction
Why Choose Us

Quality Assurance

We have an experienced and technically strong R&D team, focusing on the design, research and development, and production of paper machine accessories.

Good Service

Set up a 24-hour technical support hotline, at any time for you to answer technical problems encountered in the use of products.

Complete Process System

From raw material screening to finished product delivery, every process is strictly controlled to ensure that every product meets the industry's top standards.

 

Product Export

Our company has been deeply involved in the paper processing industry for many years and has established long-term and stable strategic cooperation relationships with many well-known paper mills at home and abroad.

 

What is Drump Pulper
 

The structure of the drum pulper mainly includes a roller-shaped drum, as well as the feeding hopper, transmission device, supporting roller device, blocking roller device, sealing device, shield and pulp pool, etc. The outer wall of the drum is inlaid with two large supporting rollers and a large gear. The two large supporting rollers are respectively supported by two sets of small supporting rollers and can rotate on the small supporting rollers. On each side of the large supporting roller on the pulp outlet side, there is a set of blocking roller devices to prevent the axial displacement of the drum. The large gear on the outer wall of the drum is driven by the small gear of the transmission device to make the drum rotate. The front part of the drum is the pulping area and the rear part is the screening area. During operation, waste paper is sent by the conveyor into the slowly rotating high-consistency pulping area. At a concentration of 14%-22%, with the rotation of the drum, it is repeatedly lifted and dropped by the scraper on the inner wall and impacts with the hard inner wall surface of the drum, separating the waste paper into fibers and various impurities. Due to the continuous rotation and slight inclination of the drum, the waste paper pulp moves forward along this inclination, enters the screening area through the pulping area. In this area, dilution water is added to dilute the slurry to a concentration of 3%-4%. The diluted slurry enters the pulp pool through the sieve pores, while the light and heavy impurities are back flushed back into the drum, continue to move forward, and are finally discharged at the end of the drum.

 

 
Related Product

 

Hydrapulper

Hydrapulper

The Hydraulic Pulper is a key equipment in the pulp and paper manufacturing industry, designed for the efficient breakdown of waste paper, pulp boards, and other raw materials into a fibrous suspension.

Type D Hydrapulper

Type D Hydrapulper

The Type D Hydra pulper is a device used for pulping various raw materials such as waste paper and pulp boards. Through the hydraulic action and mechanical agitation, the materials put into it are quickly decomposed into a fiber suspension.

H.C.Hydrapulper

H.C.Hydrapulper

"High Consistency Hydro Pulper" is a piece of equipment used in the papermaking industry. It is designed to disintegrate and blend high-concentration (typically referring to a high solid content in the pulp) waste paper, pulp boards, or other fibrous materials to prepare a fiber suspension suitable for subsequent papermaking processes.

Horizontal Hydrapulper

Horizontal Hydrapulper

The Horizontal Hydraulic Pulper is a crucial equipment in the pulp and paper production process. It is designed to break down various types of waste paper and fibrous materials into a pulp suspension efficiently.
This pulper features a horizontal drum or tank where the pulping action takes place. The inside of the drum is equipped with a rotor or impeller that rotates at high speed when the machine is in operation. The rotation creates strong hydrodynamic forces and mechanical actions that help in disintegrating the raw materials.

Wet Broke Pulper

Wet Broke Pulper

Wet Broke Pulper is a specialized equipment designed for the efficient processing of wet broke in the papermaking industry. The main purpose of a Wet Broke Pulper is to break down and disintegrate wet broke - which refers to paper that has become damaged or defective during the papermaking process, or excess paper that needs to be recycled - into a fibrous suspension. This pulper works by using a mechanical and hydraulic action to achieve this disintegration.

Semi-dry Broken Pulper

Semi-dry Broken Pulper

The "Semi-dry Broken Pulper" is a professional equipment used for processing semi-dry waste paper and plays an important role in the field of papermaking and paper product recycling and reuse. In terms of working principle, the semi-dry broken pulper puts the semi-dry waste paper into the pulping tank. Through the rotating impeller or stirring device, with the assistance of water and chemical additives, the waste paper is stirred, rubbed, and impacted. Under the combined action of mechanical force and hydraulic force, the paper fibers are separated from other impurities to form a pulp suspension.

Fiber Separator

Fiber Separator

Its main function is to effectively separate different types and qualities of fibers from the mixed pulp based on the physical properties of the fibers (such as length, fineness, flexibility, specific gravity, etc.), chemical properties (such as the surface charge and hydrophilicity of the fibers), or other related characteristics.

Hydra PurgeⅡ

Hydra PurgeⅡ

It is an advanced machine specifically designed for fine impurity separation. In the papermaking process, pulp often gets mixed with all kinds of impurities, and the presence of these impurities seriously affects the quality of paper and production efficiency.

Paper Machine Ragger

Paper Machine Ragger

In the papermaking industry, a "Ragger rope twisting machine" is a piece of equipment used to handle long and strip-shaped debris such as ropes, plastic bands, and cloth strips that are generated during the process of papermaking from waste paper.

 

Key Features of Drump Pulper
 

Perfect fiber detachment
The Drum Pulper features a unique mechanism that ensures the perfect detachment of fibers from the pulp, resulting in a higher-quality pulp. This also translates to a more efficient pulping process and increased productivity.

 

Excellent pulping quality
Not only does the Drum Pulper achieve perfect fiber detachment, but it also guarantees excellent pulping quality. This means that the end product will be of a higher standard, resulting in increased customer satisfaction and better sales.

 

Significant energy savings
The Drum Pulper has been designed with energy-saving in mind. Its innovative mechanism results in lower energy consumption and cost, making it a more sustainable and cost-effective solution.

 

Reliable continuous sludge discharge system
The Drum Pulper also features a reliable continuous sludge discharge system, ensuring that your pulping process runs smoothly and without any interruptions.

 

Lower equipment cost
Investing in the Drum Pulper will result in lower equipment costs, as it is a more cost-effective solution compared to other pulping methods.

 

Labor-saving
The Drum Pulper requires less manual labor compared to other pulping methods, freeing up your workforce to focus on other important tasks.

 

Low maintenance cost
The Drum Pulper is low maintenance, ensuring that your pulping process runs smoothly for a long time to come.

 

Drump Pulper

 

Structure and Working Principle of the Drum Pulper

The Drum Pulper consists of a cylindrical drum, a pulping mechanism, and a continuous slagging system. The drum rotates at a high speed, which creates a centrifugal force that effectively separates the fibers from the pulp. This results in perfect fiber release and excellent pulp quality.


As the drum rotates, the pulping mechanism helps to break down the fibers and remove any impurities. The continuous slagging system then removes any excess sludge from the drum, ensuring a clean and efficient process. The design of the Drum Pulper ensures that energy is used efficiently, leading to significant energy savings. The reliable slagging system also helps to reduce the need for manual labor and maintenance costs.


In summary, the Drum Pulper is designed to provide efficient and effective pulping performance, with a focus on energy savings and low maintenance costs. The structure and working principle of the Drum Pulper make it a reliable and cost-effective solution for the pulping industry.

 

Application Areas of Drump Pulper

 

Paper Industry
• Waste Paper Processing: Drum shredder is one of the key equipment for waste paper recycling. It can effectively decompose waste paper into fiber, remove plastic, metal, grit and other impurities, so as to prepare pulp that can be used for recycled paper. This is of great significance to reduce environmental pollution and save resources and energy.
• Pulping: In the papermaking process, drum pulper can be used to make various kinds of pulp, including wood pulp, bamboo pulp, grass pulp and so on. The degree of crushing and pulp concentration can be adjusted according to the process requirements to meet the needs of subsequent processes.


Waste paper recycling industry
Waste paper recycling industry is one of the important application fields of drum shredder. With the improvement of environmental protection consciousness and the increase of waste paper recycling rate, the role of drum shredder in waste paper recycling is more and more important. It can effectively convert waste paper into reusable pulp, thus realizing the recycling of waste paper.


Pre-treatment of paper-making raw materials
Roller pulp machine also plays an important role in the pretreatment of papermaking raw materials. For example, in the processing of bamboo, reeds and other papermaking raw materials, roller shredder can be crushed into fibers, for the subsequent pulping process to provide high-quality raw materials.


Other related industries
Although the main application field of drum shredder is paper industry and its related fields, but also has some applications in other industries. For example, in chemical, pharmaceutical, food and other industries, drum shredder can be used for material crushing, mixing and other processes.

 

 
Precautions for the Use of Drump Pulper
 
01/

Check before starting: The operator should carefully check whether all parts of the equipment are in good condition, especially the rotor, stator, screen and other key parts, to ensure that there is no blockage, wear and tear, loose. At the same time, check whether the electrical system, lubrication system, water supply is normal, to ensure that the equipment is started in the best condition.

02/

Safety protection: Avoid opening the protection device when the equipment is running to avoid accidents. The observation hole can be opened carefully, but nothing can be inserted into the observation hole. Emergency stop button should be used in case of emergency and the equipment should be restarted safely after the emergency is over.

03/

Drugs and water use: Drugs should never be added without water and sealing ropes should be lubricated with water. Drums should be emptied and rinsed out before prolonged shutdowns to ensure the sanitation and safety of the equipment.

04/

Cleaning and maintenance: The equipment needs to be cleaned and maintained after a long period of use, including cleaning the sieve holes in the pulping section and the screening section as well as the electronic components of the equipment. Use high-pressure water gun to rinse the spray holes and sieve holes in the sieving section, as well as tanks and agitators and other components.

05/

Sampling: When using a homogenizer (a device similar to a drum pulper), the amount of sample should be strictly controlled within the prescribed limits to avoid over- or under-sampling, which may affect the results of the experiment or the operation of the equipment.

06/

Ventilation and personal protection: When working in the drum or at the bottom of the pulping tank, ensure good ventilation and use appropriate tools and protective labor protective equipment. Wear protective eyewear and gloves to avoid injury from splashing samples or rotating parts.

 

Safe Operation Procedures for Drump Pulper
Drump Pulper
卧式水力碎浆机
Drump Pulper
湿损纸碎浆机

Pre-startup inspection: Before starting the drum pulper, check that no one is working on the equipment or auxiliary equipment, and check that manholes and drains are closed, and that safety stops and transmissions are ready. The machine should only be started after ensuring that no one is working on the drum.


Safety guards: It is strictly forbidden to open the guards while the equipment is running. The viewing holes may be opened carefully, but nothing should be inserted. The emergency stop button should be used in case of emergency and can only be opened safely after the emergency has passed.


Drum opening: The drum is opened and operated in remote/automatic mode. Before starting, make sure the drum is ready and no one is working on it. Check that the opening on the slag belt is closed. If the tank is empty, it can also be operated without an agitator. 4. Stopping and Cleaning: The Long Term Cleaner can be operated without an agitator.


Shutdown and cleaning: Before a long shutdown, empty and rinse the drum. Emptying and cleaning the pulping section includes stopping the feed chain conveyor, chemicals, and pulping white water entering the section. Make sure all fibers are emptied and rinse the screen section.


Equipment maintenance: Regularly inspect equipment for lubrication, wear and tear on drive components, and follow maintenance requirements. This includes using a high pressure water jet to rinse and clean the holes in the shower hose and the screen holes in the screen section.


Working in drums: When working in drums and at the bottom of the pulping tank, ensure good ventilation and use proper tools and protective labor gear. Make sure the drum and agitator are locked before starting work.


Slow drive: The slow drive is to be operated by trained personnel only and is used to rotate the drum to the desired position and to stop it in that position during maintenance. The drum should be mechanically locked before starting any work.

 

 
Our Factory

 

Our company has been deeply involved in the paper processing industry for many years and has established long-term and stable strategic cooperation relationships with many well-known paper mills at home and abroad. This not only witnesses our profound foundation in the industry, but also cultivates our profound understanding and exquisite skills in the manufacturing of paper machine accessories. We have an experienced and technically strong R&D team, focusing on the design, research and development, and production of paper machine accessories. We can accurately grasp market demand and provide customers with customized and high-performance solutions. Relying on strong technological strength, we are equipped with several advanced large-scale machining center machines. These high-precision equipment ensure the precision and consistency of product processing, greatly improving production efficiency and product quality. From raw material screening to finished product delivery, every process is strictly controlled to ensure that every product meets the industry's top standards. As the source manufacturer of direct sales, we eliminate intermediate links and directly face customers. This not only allows us to quickly respond to market changes, but also allows customers to enjoy more affordable prices and thoughtful services. We firmly believe that high-quality products and reasonable prices are the key to winning the market, and it is also our commitment to every customer. Looking ahead to the future, we will continue to adhere to the business philosophy of "quality first, customer first", constantly innovate, pursue excellence, and be committed to providing higher quality and efficient paper machine accessory solutions for the global paper processing industry, working together to create a better future.

 

page-753-502

 

FAQ

 

Q: What is the main function of a drum pulper?

A: A drum pulper is mainly used for pulping waste paper, breaking waste paper into fibers and removing impurities, so as to provide qualified pulp for the subsequent papermaking process.

Q: What is the structure of a drum pulper?

A: A drum pulper usually consists of a long horizontal cylinder, with the front section being the pulping section and the rear section being the screening section. The pulping section is equipped with pulping blades for breaking waste paper; the screening section is used to separate fibers and impurities.

Q: What is the working principle of a drum pulper?

A: Waste paper is continuously added to the pulping section, rotates with the cylinder together with dilution water and chemicals, and is brought to the top by the lifting plate and falls down again. Through repeated beating, most of the paper pieces are broken into single fibers. In the screening section, fibers and impurities are separated, fibers enter the subsequent process, and impurities are discharged.

Q: What is the working concentration range of a drum pulper?

A: The working concentration of the pulping section is usually 15%-17%, while the working concentration of the screening section is 3.5%-4.5%.

Q: How to adjust the pulping effect of the drum pulper?

A: The pulping effect can be optimized by adjusting the speed of the motor to change the rotation speed of the drum. In addition, the pulping effect can be affected by adjusting the ratio of waste paper, dilution water and chemicals.

Q: Is the drum pulper equipped with an automatic control system?

A: Modern drum pulpers are usually equipped with an automatic control system, which can monitor and control the operating status of the equipment in real time, and realize functions such as automatic start and stop, fault diagnosis and alarm.

Q: How is the motor of the drum pulper driven?

A: The motor of the drum pulper transmits power to the drum through the transmission device to make it rotate. The selection and configuration of the motor depends on the specifications and output of the pulper.

Q: How does the drum pulper separate fibers and impurities?

A: The drum pulper is equipped with a turbine separator, which separates the pulped fibers from impurities through centrifugal force. The fibers enter the subsequent process, and the impurities are discharged.

Q: What are the conveying devices of the drum pulper?

A: The drum pulper is usually equipped with conveying devices such as screw conveyors or pumps to convey the separated fibers to the subsequent pulping equipment.

Q: How to maintain the stable operation of the drum pulper?

A: In order to maintain the stable operation of the drum pulper, the equipment needs to be inspected and maintained regularly, including cleaning, lubrication, inspection of the transmission device and electrical system, etc.

Q: What preparations need to be made before the drum pulper is started?

A: Before starting, it is necessary to set the pulping parameters, check whether the various parts of the equipment are intact, turn on the relevant auxiliary equipment, etc., to ensure that the equipment is in good working condition.

Q: What operations need to be performed after the drum pulper is shut down?

A: After shutting down, it is necessary to empty the pulp in the drum, clean the equipment, turn off the power, etc. to ensure the safety and hygiene of the equipment.

Q: How does a drum pulper deal with harmful impurities in waste paper?

A: During the pulping process, the drum pulper will remove harmful impurities (such as metals, plastics, etc.) in the waste paper through screening and separation devices to ensure the purity of the pulp.

Q: How long is the maintenance cycle of a drum pulper?

A: The maintenance cycle of a drum pulper depends on the use of the equipment and the manufacturer's recommendations, and usually includes daily maintenance and regular overhauls.

Q: What are the lubrication requirements of a drum pulper?

A: The lubrication requirements of a drum pulper include regular inspection of the lubrication of the drum, bracket, transmission mechanism and other parts, timely replenishment of lubricating oil, and ensuring the flexible operation of all parts of the equipment.

Q: What should be paid attention to when the drum pulper is idle on rainy days or for a long time?

A: On rainy days or when it is idle for a long time, it is necessary to empty the material and moisture in the drum and perform maintenance to prevent the equipment from rusting and damage.

Q: What is the price range of a drum pulper?

A: The price of a drum pulper varies depending on the specifications, models and manufacturers, and the price range is large, ranging from several thousand yuan to hundreds of thousands of yuan.

Q: How to choose a suitable drum pulper?

A: Choosing a suitable drum pulper requires considering factors such as the type of waste paper, production requirements, equipment performance, price, and the reputation and service quality of the manufacturer.

Q: What are the advantages of a drum pulper in terms of environmental protection?

A: The drum pulper achieves the recycling of waste paper by efficiently crushing waste paper and removing impurities, reducing environmental pollution and resource waste, and meeting environmental protection requirements.

Q: What is the status of a drum pulper in the papermaking industry?

A: The drum pulper is one of the important equipment in the papermaking industry, and is of great significance in improving the recycling rate of waste paper, reducing production costs, and protecting the environment.

Hot Tags: drump pulper, China drump pulper suppliers, factory, H C Hydrapulper, Dry Broke Pulper, Horizontal Hydrapulper, Hydrapulper, pulping equipment, Drump Pulper

Send Inquiry

whatsapp

Phone

E-mail

Inquiry